Yamaha YZF-R1S Service Manual - Eng
Other manuals for YZF-R1S:
Owner's Manual, Owner's Manual
Manual is about: YZF-R1S; YZF-R1SC Motorcycle
of
457
5-21
CAMSHAFT
ENG
10 Nm (1.0 m
Skg, 7.2 ftSlb)
CAUTION:
WARNING
8. Install:
SO-ring
New
Stiming chain tensioner
1
Stiming chain tensioner bolts
2
The “arrow” mark
a
on the timing chain ten-
sioner should face up.
Always use a new O-ring.
9. Turn:
Scrankshaft
(several full turns clockwise)
10. Check:
S“T” mark
a
Make sure the “T” mark on the pickup rotor is
aligned with the crankcase mating sure face
b
.
Scamshaft punch mark
c
Make sure the punch mark
c
on the cam-
shaft is aligned with the camshaft cap arrow
mark
d
.
Out of alignment
! Adjust.
Refer to the installation steps above.
11. Measure:
Svalve clearance
Out of specification
! Adjust.
Refer to “ADJUSTING THE VALVE CLEAR-
ANCE” in chapter 3.
12. Install:
Spickup coil rotor cover
Refer to “CRANKSHAFT POSITION SEN-
SOR”.