4RF Aprisa SR+ User Manual - page 126
124 | Managing the Radio
Aprisa SR+ User Manual 1.5.3
Terminal Server
This menu item is only applicable if the serial port has an operating mode of Terminal Server.
The Terminal Server operating mode provides encapsulation of serial data into an IP packet (over TCP or
UDP).
A server connected to a base station Ethernet port can communicate with all remote station Ethernet
ports and serial ports.
Local Address
This parameter displays the IP address of this radio.
Local Port
This parameter sets the TCP or UDP port number of the local serial port.
The valid port number range is greater than or equal to 1024 and less than or equal to 49151 but with
exclusions of 0, 5445, 6445, 9930 or 9931. The default setting is 20000.
Remote Address
This parameter sets the IP address of the server connected to the base station Ethernet port.
Remote Port
This parameter sets the TCP or UDP port number of the server connected to the base station Ethernet
port. The default setting is 0.