4RF Aprisa SR+ User Manual - page 16
14 | Getting Started
Aprisa SR+ User Manual 1.5.3
Phase 3: Establishing the link
1.
If radio’s IP address is not the default IP address (169.254.50.10 with a subnet
mask of 255.255.0.0) and you don’t know the radio’s IP address see ‘Command
Line Interface’ on page 317.
Page 317
2.
Connect the Ethernet cable between the radio’s Ethernet port and the PC.
3.
Confirm that the PC IP settings are correct for the Ethernet connection:
IP address
Subnet mask
Gateway IP address
Page 71
4.
Open a web browser and login to the radio.
Page 75
5.
Set or confirm the RF characteristics:
TX and RX frequencies
TX output power
Page 99
6.
Compare the actual RSSI to the expected RSSI value (from your path planning).
Page 44
7.
Align the antennas.
Page 323
8.
Confirm that the radio is operating correctly; the OK, MODE and AUX LEDs are
green.