4RF Aprisa SR+ User Manual - page 163
Managing the Radio | 161
Aprisa SR+ User Manual 1.5.3
Click on More Options if more Layer 2/3/4 (Ethernet / IP / TCP or UDP) packet header fields are required
for the selected profile classification rule. This page describes all the possible fields that can be used for
the classification rules in bridge mode.
ETHERNET CRITERIA
Source MAC Address
This parameter sets the Layer 2 Ethernet packet header Source MAC Address field in the selected profile
classification rule in the format of ‘hh:hh:hh:hh:hh:hh’.
Source MAC Wildcard Mask
This parameter sets the wildcard mask of the ‘Source MAC Address’. If the Source MAC Address is set to
‘FF:FF:FF:FF:FF:FF’, all source MAC addresses will meet the criteria.
Destination MAC Address
This parameter sets the Layer 2 Ethernet packet header Destination MAC Address field in the selected
profile classification rule in the format of ‘hh:hh:hh:hh:hh:hh’.
Destination MAC Wildcard Mask
This parameter sets the wildcard mask of the ‘Destination MAC Address’. If the Destination MAC Address is
set to ‘FF:FF:FF:FF:FF:FF’, all destination MAC addresses will meet the criteria.