4RF Aprisa SR+ User Manual - page 317
Managing the Radio | 315
Aprisa SR+ User Manual 1.5.3
Protected Station: Monitoring > SCADA
This screen applies when the terminal is a Migration Master Station.
SCADA ADDRESS TABLE
The MMS SCADA address table shows the current mappings between SCADA protocol address and the
network location of the RTU using that address.
SCADA Address
This parameter sets the address of the RTU.
Protocol
This parameter sets the SCADA protocol used by the RTU
Age
This parameter shows the Age of this address. For each SCADA request sent to an RTU address, this
counter is reduced by one. If a response is received from the RTU, then the counter is reset to 5. When
the counter reaches 0 and the address is a dynamic address type, the entry is deleted and subsequent
packets to that SCADA address will be relearnt by trying each interface in turn.
Interface
This parameter sets the location of the RTU.
If set to Radio Path, the RTU is located on the Aprisa network.
If set to Serial Port 2, the RTU is located on the legacy network.
Type
This parameter controls if this entry is allowed to be deleted when its age reaches 0.