4RF Aprisa SR+ User Manual - page 170
168 | Managing the Radio
Aprisa SR+ User Manual 1.5.3
Click on More Options if more Layer 3/4 packet header fields are required for the selected profile
classification rule. This page describes all the possible fields that can be used for the classification rules in
router mode.
IP CRITERIA
Source IP Address
This parameter sets the Layer 3 packet IP header Source IP Address field in the selected profile
classification rules. This parameter is written in the standard IPv4 format of ‘xxx.xxx.xxx.xxx’.
Source IP Wildcard Mask
This parameter sets the wildcard mask applied to the ‘Source IP Address’. This parameter is written in the
standard IPv4 format of ‘xxx.xxx.xxx.xxx’.
0 means that it must be a match. If the wildcard mask is set to 0.0.0.0, the complete Source IP Address
will be evaluated for the classification rules.
If the wildcard mask is set to 0.0.255.255, the first 2 octets of the Source IP Address will be evaluated for
the classification rules.
If the wildcard mask is set to 255.255.255.255, none of the Source IP Address will be evaluated for the
classification rules.
Note: The wildcard mask operation is the inverse of subnet mask operation
Destination IP Address
This parameter sets the Layer 3 packet IP header Destination IP Address field in the selected profile
classification rules. This parameter is written in the standard IPv4 format of ‘xxx.xxx.xxx.xxx’.