4RF Aprisa SR+ User Manual - page 180
178 | Managing the Radio
Aprisa SR+ User Manual 1.5.3
Reset Unknown Passphrases with the Command Line Interface
As it is not possible for users to read previously set passphrases, a CLI command is available from Aprisa
SR+ software release 1.4.0 to ‘reset’ the SNMPv3 USM users back to defaults.
Note
: USM users are not related to CLI and SuperVisor users. This command will only be accessible to the
CLI ‘admin’ user logins.
To reset unknown passphrases:
1. Telnet into each radio in the network and via the CLI reset the passphrases
2. Login to the radio with:
Login: admin
Password: *********
3. Set all SNMP3 users to default values with the ‘snmpusm reset’ command (see ‘SNMP3 users to default
values’ below for the list of default values).
4. Reboot the radio with the ‘reboot’ command.