4RF Aprisa SR+ User Manual - page 129
Managing the Radio | 127
Aprisa SR+ User Manual 1.5.3
USB Serial Ports
This page provides the setup for the USB serial port settings.
SERIAL PORTS SETTINGS
Mode
This parameter defines the mode of operation of the serial port. The default setting is Disabled.
Option
Function
Disabled
The serial port is not required.
Standard
The serial port is communicating with serial ports on other
stations.
Terminal Server
A base station Ethernet port can communicate with both Ethernet
ports and serial ports on remote stations.
RS-232 traffic is encapsulated in IP packets (see ‘Serial > Port
Setup’ Terminal Server on page 124).
CLI Management
The USB host port is used to access the radio Command Line
Interface (CLI). A USB converter to RS-232 convertor will be
required to connect to a PC.
MTU Size (bytes)
This parameter sets the size of the packet in bytes received before it is transmitted if an inter-frame gap
is not detected. The default setting is 512 bytes.
Baud Rate (bit/s)
This parameter sets the baud rate to 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 or 115200
bit/s. The default setting is 115200 bit/s.