4RF Aprisa SR+ User Manual - page 292
290 | Managing the Radio
Aprisa SR+ User Manual 1.5.3
Protocol
Valid Address Ranges
Telegyr 8979
Anything between 1 and 255
SCADA Address
This parameter sets the address of the RTU.
Protocol
This parameter sets the SCADA protocol used by the RTU
Age
This parameter shows the Age of this address. For each SCADA request sent to an RTU address, this
counter is reduced by one. If a response is received from the RTU, then the counter is reset to 5. When
the counter reaches 0 and the address is a dynamic address type, the entry is deleted and subsequent
packets to that SCADA address will be relearnt by trying each interface in turn.
Interface
This parameter sets the location of the RTU.
If set to Radio Path, the RTU is located on the Aprisa network.
If set to Serial Port 2, the RTU is located on the legacy network.
Type
This parameter controls if this entry is allowed to be deleted when its age reaches 0.
Option
Function
Static
This is a permanent address and will never be deleted.
Dynamic
This is an automatically added address and may be deleted when
its age reaches 0.
Controls
The ‘Delete All Dynamic’ button deletes all entries with the Type set to Dynamic.
The ‘Delete All Static’ button deletes all entries with the Type set to Static.