4RF Aprisa SR+ User Manual - page 321
Manual is about: Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control
of
403
Managing the Radio | 319
Aprisa SR+ User Manual 1.5.3
8. Select the COM port from the Connect Using drop-down box that was allocated to the UART USB.
9. Set the COM port settings as follows:
10. Click OK. The HyperTerminal window will open.
11. Press the Enter key to initiate the session.
12. Login to the Aprisa SR+ CLI with a default Username ‘admin’ and Password ‘admin’.
The Aprisa SR+ CLI menu is shown: