Abekas Mira User's Operation Manual - Dvi
User Operations Guide—Mira Instant Replay Server
108
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Undock and Dock Viewer in Mira Explorer
If desired, it’s possible to “undock” the Viewer from the main Mira Explorer window, opening the Viewer in a separate window.
This is usually desired in order to place the Viewer onto a second computer desktop monitor connected to a second monitor output on the
Mira server graphics card.
If you connect the primary computer monitor to the DVI connector, and the secondary monitor to the VGA/DVI connector, and then start up
Mira, the Win7 operating system will usually auto-detect the second monitor, and create an “extended desktop” on this second monitor.
If the second computer monitor is connected while the Mira server is running, then you’ll need to manually detect the monitor, and extend
the desktop onto that monitor.
Manually Extend Win7 Desktop onto second computer monitor
1.Connect MAIN monitor to DVI output;
Connect EXTENDED monitor to
VGA/DVI output.
DVI
VGA/DVI
2.RIGHT-Click anywhere on computer
desktop, as shown here.
(A)
Dialog pop-up appears, as shown.
3.Click “Screen resolution” in pop-up.
(A)
“Screen Resolution” window appears,
as shown below.
Continued on next page…
A
1
1
2
3