Abekas Mira User's Operation Manual - page 65
User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
63
Clip Metadata — Modify
There are two methods available to modify the clip metadata: either directly within the Mira Explorer clip listing window itself or from the
“Clip Modify” pop-up window. The direct method within the Mira Explorer window does not provide access to the clip Play Repeat “IN and
“OUT” metadata; therefore, if you need to modify these metadata, then please use the “Clip Modify” pop-up window.
NOTE: If the clip you are attempting to modify is locked (“locked” icon is visible), then it is not possible to modify that clip. Please refer to the procedure to unlock the
clip, found starting on page 113 below.
Modify Clip Metadata — Clip Modify Dialog
The clip modify menu provides additional metadata that can be modified for each stored clip. There are three methods available to open
the Clip Modify window:
M
E
T
H
O
D
1
1.Click “Clip Library” menu.
2.Select “Modify…” menu item:
3.
— or RIGHT click Clip Name in Clip Library —
M
E
T
H
O
D
2
1.RIGHT-Click on desired clip.
2.Click “Modify…” from pop-up menu:
— or use QWERTY keyboard shortcut —
3
1.HOLD DOWN
, and press
(HOLD DOWN)
+
The “Clip Modify” window appears, as shown below:
Continued on next page…
2
1
1
2
1