Abekas Mira User's Operation Manual - page 29
User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
27
Mira 8-Channel Rear Panel
(shipped after June, 2014)
The illustration in Figure 5 details the video, audio, timecode, control, data and power connections on the rear panel of the latest Mira
Instant Replay servers, which shipped after June, 2014. Descriptions for each connection follow the illustrations.
Mira 8CH Instant Replay Servers with D25 TASCAM Digital / AES 59 shipped AFTER June, 2014:
Figure 5
Mira 8-Channel Server Rear Panel with D25 AES Digital Audio Connectors
(A) AC Power #1 In
Input #1 for mains power into the dual-redundant power supply. The power supply is auto-sensing with an input AC voltage
range of 100VAC to 240VAC at 47Hz to 63Hz. If only one mains power cord is plugged in, the power supply alarm will sound
when Mira is powered on. Either plug in the second AC power cord or press the
POWER SUPPLY ALARM MUTE
button (located to
the immediate right of the PSU’s) to silence the alarm.
NOTE: Some versions of the Mira power supply do not offer an “Alarm Mute” button. You must plug in the second power cord to silence the alarm.
(B) AC Power #2 In
Input #2 for mains power into the dual-redundant power supply. The power supply is auto-sensing with an input AC voltage
range of 100VAC to 240VAC at 47Hz to 63Hz. If only one mains power cord is plugged in, the power supply alarm will sound
when Mira is powered on. Either plug in the second AC power cord or press the
POWER SUPPLY ALARM MUTE
button (located to
the immediate right of the PSU’s) to silence the alarm.
NOTE: Some versions of the Mira power supply do not offer an “Alarm Mute” button. You must plug in the second power cord to silence the alarm.