Abekas Mira User's Operation Manual - Vv Vv
User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
183
Stand-Alone Stereoscopic 3D Channels
The following configurations of the Mira 8-Channel and Mira 4-Channel servers allow video channel pairs to operate as a Stereoscopic 3D
(3D) transport, with each paired transport having one RS422 serial control port.
With Mira configured this way, each 3D channel pair acts as a single transport, and this 3D pair can operate as either a recorder or player.
IMPORTANT NOTE: If you wish to use Mira for Sports Instant Replay with 3D cameras, then please use the procedure “Instant Replay for
Stereoscopic 3D Cameras” on page 195 below.
IMPORTANT NOTE: The following tables detail the channel pairing for 3D channel configuration, with RS422 serial control. The shading
highlights channels that are paired together for 3D operation.
Mira 4-Channel & Mira 8-Channel Servers
Configuration
SD/HD-SDI Video IN / OUT
RS422 Control Port
ChA+ChC | ChB+ChD
VV VV
3D-LEFT #1
3D-RIGHT #1
3D L+R #1
= Unused
3D-LEFT #2
3D-RIGHT #2
3D L+R #2
= Unused
Mira 8-Channel Servers Only
Configuration
SD/HD-SDI Video IN / OUT
RS422 Control Port
ChE+ChG | ChF+ChH
VV VV
3D-LEFT #3
3D-RIGHT #3
3D L+R #3
= Unused
3D-LEFT #4
3D-RIGHT #4
3D L+R #4
= Unused
Continued on next page…