Abekas Mira User's Operation Manual - Windows Login
User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
33
Windows Login
After powering ON the Mira server, the Windows login screen may appear if your Mira server is configured with this option.
If a login screen appears, a user password must be entered. This password may be changed by the end-user after a successful login.
1.At the “Mira Server” password prompt, enter the factory-default password:
Abekas
Be sure to enter this password exactly as shown, observing the upper-case “A” and lower-case letters which follow.
The password may be different, if the system administrator for Mira within your organization has changed it.
If the password was changed and then forgotten, please contact Abekas technical support.
2.Click blue arrow button to right of password entry field to accept the password (or press
on QWERTY keyboard).
You will now be logged into Mira Server.
NOTE: After a successful login into Windows, the video channels and RS422 serial control in Mira are all active. If you’re using an external RS422
controller on Mira, that controller may now be used to control the video channels (including loading and playing clips).
NOTE: If you do NOT have an external controller connected to Mira, you may use the procedure below to log into Mira Explorer and use that program to
load and play clips.