Abekas Mira User's Operation Manual - page 286
User Operations Guide—Mira Instant Replay Server
284
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Define, Save & Load Clip: Manually Mark OUT / Auto-Mark IN
This procedure has the operator mark only the desired OUT point for the clip, then allows the system to automatically mark the IN point,
saving the clip in the next open Clip Register of the current Bank—with one additional button press. The clip is then loaded, ready for
replay, with a final button press.
This procedure marks the desired OUT point first; then saves the clip, letting the system automatically mark the IN point. This process is
more time-efficient when you want to manually mark the OUT point.
1.Tap desired OUTPUT CONTROL button
for PGM channel you want to control.
The
button is tapped in this example;
Button glows orange, corresponding to the
“Orange” PGM-1 output video channel.
The frame surrounding the active PGM channel
is highlighted in the display monitor.
2.Tap
button in LIVE EE group.
is activated on PGM-1.
3.Wait for action you’d like to save & replay.
4.When something interesting happens,
wait for end of action sequence…
5.Then tap
button.
OUT point is set:
button glows RED.
1
2
5
Continued on next page…