Abekas Mira User's Operation Manual - page 266
User Operations Guide—Mira Instant Replay Server
264
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
LIVE-EE Mode: Activate GANG Control & Select Desired Camera
This procedure selects GANG output video channel control, then changes camera angle on active PGM channel during
mode.
1.Tap desired OUTPUT CONTROL button
for PGM channel you want to control.
The
button is tapped in this example;
Button glows green, corresponding to the
“Green” PGM-2 output video channel.
The frame surrounding the active PGM channel
is highlighted in the display monitor.
Two red arrows at very top of PGM-2 window
reminds you which PGM channel is affected by
any subsequent camera angle change.
2.Tap
in OUTPUT CONTROL group.
Frames surrounding two PGM channels are both
colored WHITE when GANG control is active.
3.Tap
button in LIVE EE group.
is activated on PGM-1 and PGM-2.
Continued on next page…
Continued on next page…
1
2
3