Abekas Mira User's Operation Manual - page 257
User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
255
Parameter Name
Style
Parameter Settings
Operational Description
14. Camera Softkey Change in CP Mode
Toggle
Cue to IN & Play = Default Value
Change Angle Only = Alternate Value
Determines what happens when any CAMERA
softkey is tapped while
(CP)
mode of operation is active.
Cue to IN & Play
= When CAMERA softkey
is tapped, first seek to
clip IN point, and then
play forward from
there.
Change Angle Only
= When CAMERA softkey
is changed to a new
camera angle, remain
at the current
timecode, and simply
switch to new camera
angle; while continuing
to play (forward or
backward, depending
on direction of play at
time of CAMERA
softkey change).
15. 2-Replay Channels TRANSITION
Toggle
MIX = Default Value
CUT = Alternate Value
When there are (2) replay output channels, this
parameter determines the transition type when
the TAKE button is pressed, or when items in the
playlist are advanced during PL mode.
MIX = Dissolve between two replay output
channels.
CUT = Immediately swap two replay output
channels.
16. MIX TRANSITION Duration
Numeric
00:01 = Minimum Value
00:05 = Default Value
10:00 = Maximum Value
(Increment is 1 frame)
Sets duration of the MIX transition when
“2-Replay Channels TRANSITION” = MIX
17. AUTO GANG for LIVE EE
Toggle
ON = Default Value
OFF = Alternate Value
Determines if Output Control GANG function is
automatically engaged whenever LIVE EE button
(
) is pressed.
ON = AUTO GANG enabled.
OFF = AUTO GANG disabled.
18. GANG Disable when P1/P2/P3/P4 is
pressed
Toggle
ON = Default Value
OFF = Alternate Value
Determines if Output Control GANG function is
automatically disabled whenever any channel
control button (
) is
pressed.
ON = GANG Disabled automatically.
OFF = GANG remains active.