Abekas Mira User's Operation Manual - page 258
User Operations Guide—Mira Instant Replay Server
256
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Parameter Name
Style
Parameter Settings
Operational Description
19. LIVE EE Auto-Selects Preferred
CAMs
Toggle
ON= Default Value
OFF = Alternate Value
Determines if tapping LIVE EE button
automatically selects predetermined camera
angles for each PGM channel.
ON = Tapping LIVE EE button changes camera
angles of PGM channels to revert to “preferred
camera angles.”
OFF = Tapping LIVE EE button affects only the
mode of operation, and does not change angles
currently loaded into PGM channels. Camera
angles are carried over from last active angle
from last active mode.
20. P1 Preferred CAM
21. P2 Preferred CAM
22. P3 Preferred CAM
23. P4 Preferred CAM
Toggle
(Value depends on number of
cameras available in event)
CAM 1 (P1 Default)
CAM 2 (P2 Default)
CAM 3 (P3 Default)
CAM 4 (P4 Default)
CAM 5
CAM 6
When “LIVE EE Auto-Selects Preferred CAMs” is
set to “ON,” this parameter assigns preferred
camera angles to all available PGM channels.
When LIVE EE is tapped, the camera angles of all
PGM channels will revert to the values defined
here.
24. AUTO LOAD clip upon cursor move
in CLIP PLAY mode
Toggle
ON = Default Value
OFF = Alternate Value
Determines whether or not a new clip is
automatically loaded by moving the Clip Register
highlighting cursor during
mode.
ON = Auto-load clip upon cursor move.
OFF = User must tap
button to load
clip, after a clip is highlighted.
25. Obey clip OUT point in CP Mode
Toggle
ON = Default Value
OFF = Alternate Value
Determines if playback stops or continues when
OUT point is reached in clip; only while
(CP) mode of operation is active.
ON = OBEY and STOP at OUT point.
OFF = IGNORE and PLAY through OUT point.
26. ALWAYS use PVW/PGM pair in PLAY
LIST AIR
Toggle
OFF = Default Value
ON = Alternate Value
Determines whether or not a playlist will
automatically play out of two channels
(PVW/PGM) upon entering
mode.
ON = Always use 2 channels (PVW/PGM)
when airing a playlist.
OFF = Playlists can be aired out of 2 channels
(PVW/PGM), or separately from
individual channels (PGM1, PGM2, etc.)
27. Vue Marks AUTO Save to Clip
Register when Append
Toggle
OFF = Default Value
ON = Alternate Value
Determines if a mark point will automatically be
saved in a clip register upon being appended to
a playlist.
ON = When a mark point is selected and the
append button is tapped, the mark point
will be added to a playlist and saved in a
clip register.
OFF = When a mark point is selected and the
append button is tapped, the mark point is
only added to the active playlist.