Abekas Mira User's Operation Manual - page 169
User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
167
18.Right-Click on next duplicate segment
under “Angle” column;
19.Select “Set angle…” item;
20.Click desire “Cam” angle.
(A)
The new camera angle is selected.
Repeat steps for any additional CAM angles.
The following steps are performed to split one of the segments to create two separate segments from the one segment.
This step is optional; skip ahead to step (25) if you don’t need to split the segment.
21.Click to highlight desired segment.
22.Click
(Clip Load) button to load clip in
channel transport.
The clip is loaded in the video channel.
23.Use clip slider (or any transport control) to
locate desired SPLIT point for segment.
24.Click
to split the segment.
The segment is split, and a new segment created
from the split point forward. The Cam angle
remains the same.
Continued on next page…
19
18
20
A
21
23
22
23
24