Abekas Mira User's Operation Manual - Safety Warnings
User Operations Guide—Mira Instant Replay Server
Page iv of xii
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Safety Warnings
We were at the mercy of a multi-language translation service provider, who produced the translations for the following very important
information; we realize there are some pretty humorous phrasing, grammar, and choice of vocabulary used in some of the translated text.
Please ignore that humor as best you can, so you can better pay attention to the basic messages being conveyed. You will then learn how
to avoid situations which may result in consequences that will short-circuit your chances of enjoying this humor again.
The text of the ENGLISH version may be highlighted, copied and pasted into your favorite language-translation tool (online or offline) to
translate this important text into your local language for others to read.
Safety Warnings — English / Arabic / Chinese
ENGLISH
WARNING!
This system complies with the safety standard IEC/EN60950-1. To ensure safe operation and to guard against potential shock hazard or risk of fire, the
following must be fulfilled:
This system features auto-ranging power supplies. Ensure your AC power source is within the correct operating range of voltage and frequency, as
required by the system.
Each chassis in this system must be electrically grounded by connecting the input power cord(s) to a correctly wired and grounded power outlet.
The input AC power cord(s) supplied with this system must be wired as follows:
Live = Brown
Neutral = Blue
Earth = Green
Completely disconnect all input AC power cords from chassis before removing top cover from chassis. Failure to do so will expose dangerous
electric currents and voltages. Physical contact with these electric currents and voltages is extremely dangerous and may result in severe
physical injury or death! Only qualified service personnel should remove the top cover from the chassis.
Modules marked with this symbol may be removed while the system is operating (powered). After removing a module, beware of dangerous
electric currents and voltages that are exposed on the module receptacle connector inside the chassis. Please keep fingers, tools, and foreign
metal objects away from the exposed receptacle connector while the chassis has input AC power applied. Physical contact with these electric
currents and voltages is extremely dangerous and may result in severe physical injury or death! Only qualified service personnel should
remove these modules.