C-Nav 2050M User Manual - page 39
C-Nav2050 User Guide
Controller
The C-Nav2050 GPS receiver is designed for use with
an external controller solution connected via one of two
serial ports.
This may be accomplished using a PC, Tablet PC or
Personal Digital Assistant (PDA) and a software
program which implements the rich control language
defined for C-Nav GPS products. Refer to the users
guide of the controller solution for further information.
Refer to Chapter 4 for descriptions of C-Nav
Control/Display Unit and controller software options, or
visit
www.cnavgps.com
Unique Features
The C-Nav2050 GPS receiver has many unique
features:
C-Nav Correction Service
The ability to receive C-Nav’s unique correction service
is fully integrated within each unit. A single set of
corrections can be used globally, enabling a user to
achieve decimeter level positioning accuracy without
the need to deploy a separate base station, thus saving
time and capital expenditure.
C-Nav position outputs are referenced to the ITRF2005
datum
.
Positioning Flexibility
The C-Nav2050 is capable of using WAAS, EGNOS,
MSAS, GAGAN (RTCA/DO-229D compliant) code
corrections via two internal Satellite Based
Augmentation System (SBAS) channels. The C-
1-9