C-Nav 2050M User Manual - page 52
of
166
C-Nav2050 User Guide
Event Input Configuration
Figure 11 details the wiring of the Event/Can cable
assembly (P/N: 4250007-3).
Table 4 details the wiring configuration required for
Event-Hi, and Event-Lo pulse sensing.
Figure 11: Event Cable Wiring Diagram
Table 4: Event Wiring Connections
Pin #
Signal Name
Color
1 Event
Lo Black
2
Event Hi
Red
3 Ground
White
4 CAN
Hi
Green
5 CAN
Lo
Orange
Once the cable is wired to correspond with the event
pulse requirements, configure the receiver to output the
message containing a time mark, referenced to the time
kept within the receiver, indicating when the event is
sensed (0xB4; See Figure 13).
2-10