C-Nav 2050M User Manual - page 7
C-Nav2050 User Guide
How to Enter a C-Nav Service Activation Code
C-Setup or C-Monitor
While communicating with the receiver via the
Control port (default COM2), select
Device
License Auth & Cancel.
Select
Browse then navigate to and select
the attached license file, obtained from C-Nav
Support.
Select
Ok to upload the activation code to
the receiver.
Select
Device License Status and check
the new expiration date to verify that the
activation code was entered correctly.
C-NaviGator
Open the attached file obtained from C-Nav
Support with Notepad or Wordpad and make
note of the 36-digit License Code.
Press the Menu button and select
Settings
C-Nav2050 Corrections Authorization.
Using the keypad, input the 36-digit License
Code found in the attached file then select
Apply.
Check the expiration date to verify that the
activation code was entered correctly.
v