C-Nav 2050M User Manual - page 80
of
166
C-Nav2050 User Guide
Logging Raw/Binary Data Using StarUtil
C-Nav RAW GPS 'binary' data can easily be recorded
using the StarUtil application on the PC that is
connected to the control port of the C-Nav2050 unit.
ckly
the source of any problems.
1. Start StarUtil (2.6 or higher) and open the PC
e RAW GPS
t’ (Typically
0 unit.
Logged data files can help C-Nav Support to better
understand the nature of user issues and more qui
determine
Communications port to receive th
'binary' data from the ‘Control Por
COM2) of the 205
Figure 29: StarUtil PC Port Configuration
4-6