C-Nav 2050M User Manual - page 53
of
166
C-Nav2050 User Guide
The Event Input can be triggered on the Rising or
Falling edge of the input pulse. Configuration is possible
through the StarUtil program, available on the C-Nav
website at
www.cnavgps.com/support
Figure 12 is a screen capture of the program’s 1PPS &
Event Latch window.
Figure 12: 1PPS & Event Latch Configuration
Enable the Event Latch message (0xB4) in the NCT
2000 Message Output list. Set the Message Rate for
0xB4 to “On Trigger”. Right-Click on the Rate area
adjacent to the B4 Message ID, and follow the menu as
depicted in Figure 13. Once configured. the Event Latch
Message (0xB4) is output upon recognition of an input
trigger by the receiver.
Figure 13: Event Latch Output Rate Configuration
2-11