C-Nav 2050M User Manual - page 57
C-Nav2050 User Guide
Chapter 3 Installation
This chapter provides guidance on hardware installation
for optimum performance
.
Prior to commencing any installation, discuss proposed
mounting locations/methods and cable routes with the
vessel chief engineer or master to ensure that all parties
are aware of the work to be done and the risks involved.
Always wear appropriate protective equipment,
including a certified fall arrestor harness and
hardhat when working at heights to prevent injury
to personnel, or death. Prior to commencing any
work on the mast, ensure that all radar systems
are switched off and isolated.
Standard Antenna
The 5/8 inch BSW threaded antenna mount has a depth
of 16mm (0.63 inch).
Do not loosen or remove the eight Phillips screws
on the base of the antenna for mounting
purposes. This will VOID the warranty and
compromise the environmental seal of the
antenna, leading to internal damage.
Antenna placement is critical to good system
performance. It is necessary to mount the antenna as
high on the mast as possible in order to avoid antenna
shading by surrounding structures.
3-1