Cannondale ATV Owner's Manual - Warning
106
Rear brake disc carrier preload nut inspection
Inspect for play in the rear brake disc carrier before
every ride to ensure proper brake function and to protect
the rear axle assembly from damage.
1. Place the vehicle on firm level ground. Make sure the
rear brake disc is completely cool and the disc
mounting bolts are tightened to the specified torque
before continuing.
2. Using a protective leather glove, firmly hold the rear
portion of the brake disc and test the disc for any side-
to-side or rotational play. Test by trying to move the
disc up and down (rotational play) and left and right
(side-to-side play). Make sure you are not rotating the
WARNING
POTENTIAL HAZARDS
(1) Injury to your hands (burns, cuts)
(2) Crashing the ATV, losing control
WHAT CAN HAPPEN
(1) Brake discs operate at very high temperatures
and remain hot for a period of time after the brakes
are released. If you touch them, you can burn
yourself. Also, brake discs can develop very sharp
edges; they can be sharp enough to cut your hands
or skin severely.
(2) If you operate this ATV with a malfunctioning
brake system you can lose the brakes. You can lose
control of the vehicle resulting in an accident with
severe injury or death.
HOW TO AVOID THE HAZARD
(1) Always allow the brake discs to cool completely
before servicing. Wear a protective leather glove
when checking the rear brake disc for play.
(2) Never ride this ATV with a malfunctioning brake
system. Contact an authorized Cannondale
motorsports dealer for servicing.