Cannondale ATV Owner's Manual - page 120
Manual is about: 2002
of
180
118
Chain rollers inspection
1. Rotate the chain rollers. They should rotate smoothly.
2. Measure the outside diameter of the upper and lower
rollers. Replace if out of specification.
Rear brake disc & sprocket guards
Make sure both guards are mounted securely. Inspect
each guard for cracking and/or other signs of excessive
damage or wear. On the sprocket guard, pay particular
attention to the areas (dotted circles) indicated in the
photo. These areas can receive excessive wear by an
incorrectly adjusted chain. If either guard is damaged
replace it with a new one.
1. Upper roller
2. Lower roller
a. O.D.
a
(1)
(2)
1. Sprocket guard
2. Rear brake disc guard
1
2