Cannondale ATV Owner's Manual - page 134

132

Lighting

NOTE : 

Always wipe off a newly installed bulb with alcohol-

dampened clean cloth or tissue. Oils from your fingers

can cause premature bulb failure.

Headlight bulb replacement

1. Remove the headlight cover (left or right).

2. Disconnect the headlight harness connector.

3. Turn the bulb unit counterclockwise to remove it from

the headlight housing.

4. Install a new bulb unit into the housing.

5. Reconnect the harness.

6. Test for proper operation.

Taillight bulb replacement

Turn the bulb mount counterclockwise and remove it 

from the housing. 

1. Pull the bulb out from mount and install a new bulb.

2. Reinstall the mount into the taillight housing.

3. Test for proper operation.

1. Bulb mount

2. Bulb

1

2