Cannondale ATV Owner's Manual - page 88
Manual is about: 2002
of
180
86
Changing engine oil
NOTE :
Have a clean shop towel handy to clean up any spilled
oil.
1. Start the engine and allow to reach normal operating
temperature 158°F (70°C). Then, turn the engine off.
2. Connect a clear plastic hose to the left spar drain bolt
and loosen it. Allow the spar contents to drain
completely into a suitable container. Tighten the bolt to
the specified torque.
3. Move to the right frame spar and drain the engine oil
from it the same way. Tighten the spar drain bolt to the
specified torque.
1. Left spar drain bolt
2. Hose
(1)
(2)
1. Right spar engine oil drain bolt
1