Cannondale ATV Owner's Manual - page 86
84
Fuel filter replacement
See “2002 Model Specifications” starting on page 161.
Replace the inline fuel filter every 5 hours.
CAUTION
Do not operate with the fuel filter removed. You can
seriously damage the fuel injection system. The
result may be hard starts, stalling, performance
loss, or severe damage to the system.
Always use a high quality filter of the specified
type. “Cheap” or inexpensive filters not meeting
the specified efficiency can result in damage to the
fuel system (e.g., clogged fuel injectors, inadequate
fuel supply, blockage, and reduced flow).
NOTE :
We recommend that you keep a few fuel filters which
are inexpensive and easily obtained - handy for
convenient replacement.
1. Make sure the engine and exhaust system are
completely cool before starting this procedure.
2. Remove the fuse, seat, and right side panel.
3. Cradle the fuel filter with the hoses attached in a clean
dry shop towel to help absorb any residual fuel that will
drain as the filter is removed. Loosen the fuel hose
clamps and remove the fuel filter.
4. Install the specified fuel filter and tighten the hose
clamps securely.
5. Reinstall removed components.
6. Follow-up with a visual inspection of the fuel system. If
any leaks or damage is found, take the necessary
corrective action.
1. Inline fuel filter
2. Fuel hose clamps
1
2
FLOW