Cannondale ATV Owner's Manual - page 21
Manual is about: 2002
of
180
19
2. Use your fingertips to lift up the rear of the seat slightly.
Then, pull the seat back toward the rear of the vehicle
and lift it off.
3. To install the seat, align the receivers in the seat pan
with the fuel tank clip and the subframe guides.
4. Press down gently on the middle of the seat and slide
the seat forward onto the clip and subframe guides. If
correctly aligned, the rear seat pegs will slip easily
through the subframe seat buffers.
1. Fuel tank clip
2. Subframe guides (right)
3. Seat pegs
4. Subframe seat buffers (right)
5. Owner’s Manual & Tool Kit
(1)
(3)
(4)
(5)
(2)