Cannondale ATV Owner's Manual - page 137
135
10. Lift out the spark plug coil.
11. Use a spark plug socket and long extension to loosen
and remove the spark plug from the cylinder head.
NOTE :
Spark plugs are good indicators of the engine’s
operating condition. Examining the condition of the
spark and physical signs produced by various engine
conditions (normal and abnormal) should be left to a
qualified service technician.
12. Before reinstalling the spark plug measure each gap (a)
with a wire gauge or feeler gauge. If either gap is out of
specification, adjust it.
13. Lightly coat the threads with a suitable anti-seize
compound; this will allow for easier plug removal in the
future.
14. Install the spark plug into the cylinder head and tighten
to the specified torque.
15. Reinstall removed components.
1. Coil
111794
1
a. gap
(a)
S
A
Z
(a)