D-Link DES-3350SR User Manual - page 28
D-Link DES-3350SR Standalone Layer 3 Switch
18
Figure 6 - 4. Save Configuration window
Click the Save Configuration button to save the current switch configuration in NV-RAM. The following dialog box will confirm
that the configuration has been saved:
Figure 6 - 5. Save Configuration Confirmation dialog box
Click the OK button to continue.
Once the switch configuration settings have been saved to NV-RAM, they become the default settings for the switch. These
settings will be used every time the switch is rebooted.
Areas of the User Interface
The user interface provides access to various switch configuration and management screens, allows you to view performance
statistics, and permits you to graphically monitor the system status. The figure below shows the user interface. The user interface is
divided into 3 distinct areas as described in the table.
Figure 6 - 6. Main Web-Manager window
Area Function
1
Presents a graphical near real-time image
of the front panel of the switch. This area
displays the switch’s ports and expansion
modules, showing port activity, or duplex
mode, depending on the specified mode.
Various areas of the graphic can be
selected for performing management
Area 2
Area 1
Area 3