D-Link DES-3350SR User Manual - page 86
D-Link DES-3350SR Standalone Layer 3 Switch
76
Figure 7 - 63. 802.1X Capability Settings window
To set up the switch’s 802.1x port-based authentication, select which ports are to be configured in the FromandTofields. Next,
enable the ports by selecting Authenticator from the drop-down menu under Capability. Click Apply to let your change take
effect.
Configure the following 802.1x port settings:
Parameter
Description
From and To
Ports being configured for 802.1x
settings.
Capability
Two role choices can be selected:
Authenticator
− A user must pass the
authentication process to gain access to
the network.
None
− The port is not controlled by the
802.1x functions.
Initialize Ports for Port Based 802.1x
Existing 802.1x port settings are displayed and can be configured using the window below.
Click Initialize Port(s) on the PAE Access Entity folder on the Configuration menu to open the Initialize Port window: