D-Link DES-3350SR User Manual - page 68
D-Link DES-3350SR Standalone Layer 3 Switch
58
Figure 7 - 40. Access Profile Configuration window (Packet Content Mask)
This screen will aid the user in configuring the Switch to mask packet headers beginning with the offset value specified. The
following fields are used to configure the Packet Content Mask:
Parameter
Description
Profile ID (1-255)
Type in a unique identifier number for
this profile set. This value can be set
from 1 -255.
Type
Select profile based on Ethernet (MAC
Address), IP address or packet content
mask. This will change the menu
according to the requirements for the
type of profile.
Select Ethernet to instruct the Switch to
examine the layer 2 part of each packet
header.
Select IP to instruct the Switch to
examine the IP address in each frame's
header.
Select Packet Content Mask to specify a
mask to hide the content of the packet
header.
Offset
This field will instruct the Switch to mask
the packet header beginning with the
offset value specified: