D-Link DES-3350SR User Manual - page 44
D-Link DES-3350SR Standalone Layer 3 Switch
34
switch’s static forwarding table when adding a
new entry. Displays the currently selected
MAC address when editing.
Allowed to Go Port
Allows the selection of the port number on
which the MAC address entered above resides.
Multicast Forwarding
Multicast MAC addresses can be statically entered into the switch’s MAC Address Forwarding Table. These addresses will never
age out.
To enter a Multicast MAC address into the switch’s forwarding table, click on the Forwarding Filtering folder on the
Configuration menu and then click Multicast Forwarding:
Figure 7 - 14. Static Multicast Forwarding Settings window
To add a new multicast MAC address to the Switch’s forwarding table, click the Add button:
Figure 7 - 15. Setup Static Multicast Forwarding Table window
The following fields can be set:
Parameter
Description
VID
Allows the entry of the VLAN ID of the
VLAN the MAC address below is a member
of.
Multicast MAC Address
Allows the entry of the multicast MAC
address of an end station that will be entered
into the switch’s static forwarding table.
Port
Select the port number on which the MAC
address entered above resides.
None
Specifies the port as being none.
Egress
Specifies the port as being a source of
multicast packets originating from the MAC
address specified above.