D-Link DES-3350SR User Manual - page 55
D-Link DES-3350SR Standalone Layer 3 Switch
45
Figure 7 - 26. Port Security Settings window
The following fields can be set:
Parameter
Description
From & To
Use this to specify a consecutively numbered
group of ports on the switch for configuration.
Admin State
<Disabled>
Allows the selected port(s) dynamic MAC
address learning to be locked such that new
source MAC addresses cannot be entered into
the MAC address table for the locked port or
group of ports. It can be changed by toggling
between Disabledand Enabled.
Max Learning
Addr.(0-10) <1 >
Select the maximum number of addresses that
may be learned for the port. The port can be
restricted to 10 or less MAC addresses that are
allowed for dynamically learned MAC
addresses in the forwarding table.
Lock Address Mode
Select Delete On Timeout to clear dynamic
entries for the ports on timeout of the
Forwarding Data Base (FDB). Specify Delete
On Reset to delete all FDB entries, including
static entries upon system reset or rebooting.