D-Link DES-3350SR User Manual - page 37
D-Link DES-3350SR Standalone Layer 3 Switch
27
Status
Toggle between Enabled and Disabled.
IGMP
IGMP Snooping
From the Configuration menu, select the IGMP folder, and then click IGMP Snooping to open the following window:
Figure 7 - 7. Current IGMP Snooping Group Entries window
To edit an IGMP Snooping entry on the switch, click the Modify button next to the entry on the Current IGMP Snooping Group
Entries window.The IGMP Snooping Settings window, shown below, will appear.
Figure 7 - 8. IGMP Snooping Settings window
The following fields can be set:
Parameter
Description
VLAN ID
Allows the entry of the VLAN ID for which
IGMP Snooping is to be configured.
VLAN Name
Allows the entry of the name of the VLAN
for which IGMP Snooping is to be
configured.
Query Interval (1-
65535)
Allows the entry of a value between 1 and
65535 seconds, with a default of 125
seconds. This specifies the length of time
between sending IGMP queries.
Max Response
Time(1-125)
Sets the maximum amount of time allowed
before sending an IGMP response report.
A value between 1 and 25 seconds can be
entered, with a default of 10 seconds.
Robustness Value
A tuning variable to allow for VLANs that
are expected to lose a large number of