D-Link DES-3350SR User Manual - page 93
D-Link DES-3350SR Standalone Layer 3 Switch
83
SSH Authentication Mode and Algorithm Settings
The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for authentication encryption.
There are three categories of algorithms listed and specific algorithms of each may be enabled or disabled by using their
corresponding pull-down menus. All algorithms are enabled by default. To open the following window, click Security
Management > Secure Shell (SSH) > SSH Authentication Mode and Algorithm Settings:
Figure 8 - 5. SSH Algorithms window
The following algorithms may be set:
Parameter Description
Authentication Algorithm
Password
This field may be enabled or disabled to choose if the administrator wishes to use a
locally configured password for authentication on the Switch. This field is Enabled by
default.
Public Key
This field may be enabled or disabled to choose if the administrator wishes to use a
publickey configuration set on a SSH server, for authentication. This field is Enabled
by default.
Host-based
This field may be enabled or disabled to choose if the administrator wishes to use a
host computer for authentication. This parameter is intended for Linux users requiring
SSH authentication techniques and the host computer is running the Linux operating
system with a SSH program previously installed. This field is Enabled by default.
Encryption Algorithm
3DES-CBC
Use the pull-down to enable or disable the Triple Data Encryption Standard encryption
algorithm with Cipher Block Chaining. The default is Enabled.
Blow-fish CBC
Use the pull-down to enable or disable the Blowfish encryption algorithm with Cipher
Block Chaining. The default is Enabled.