DAELIM BESBI SC125 - Service Manual - page 103
Fix the tensioner shaft with a hard clip.
Assemble a new gasket to the tensioner lifter, and
install the tensioner lifter on the cylinder.
Tighten the tensioner mounting bolts.
TORQUE VALUE : 1.2 kgf m
Remove the tensioner shaft clip from the tensioner
lifter. Assemble the O-ring and pan screws to the
tensioner lifter.
TORQUE VALUE : 0.4 kgf m
Fill clean engine oil into the operating parts of the
cylinder head.
Adjust the valve clearance.
Remove oil from the cylinder head cover grooves, and
accurately assemble the gasket to the cover.
Install the cylinder head cover.
Tighten the cylinder head cover bolts.
TORQUE VALUE : 0.9 kgf m
Shroud comp.
Install the carburetor.
Install the engine to the frame.
9-15
CYLINDER HEAD / VALVES