DAELIM BESBI SC125 - Service Manual - page 70
Other manuals for BESBI SC125 -:
Owner's Manual, Service Manual
of
188
Install the movable drive face and movable drive face
boss on the crank shaft.
Install the drive belt into the drive face.
Install the washer and nut temporarily on the drive face.
Tighten the nut to the specified torque using the drive
face holder.
TORQUE VALUE : 4.0 kgf m
TOOL : DRIVE FACE HOLDER
NOTE
Tighten the drive face nut to the specified torque.
Correctly match the drive face and crank shaft
serration when assembling.
If the drive face holder cannot be used, remove the
cooling fan and hold the flywheel with the universal
holder.
Install the LH. crankcase cover.
7-10
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION