DAELIM BESBI SC125 - Service Manual - page 76
Other manuals for BESBI SC125 -:
Owner's Manual, Service Manual
of
188
INSTALLATION DRIVEN PULLEY ASS’Y
Turn the driven pulley ass’y clockwise, enlarge the belt
assembly groove to maximum.
Install the drive belt into the driven pulley sub ass’y,
and install to the drive shaft.
Install the drive belt into the movable drive face.
Install the drive face, and install the drive pulley nut
temperarily.
Tighten to the specified torque using the face.
TORQUE : 4.0 kgf m
TOOLS : DRIVE FACE HOLDER
Install the cluch outer into the driven pulley sub ass’y,
install the special nut temporaily.
Hold the clutch out using the universal holder, tighten
the flange nut to the specified torque.
TORQUE : 4.0 kgf m
TOOLS : UNIVERSAL HOLDER
7-16
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION