DAELIM BESBI SC125 - Service Manual - page 130
12-6
FRONT WHEEL/FRONT FORK/STEERING
Bearing Inspection
Manually turn the bearing inner race, and replace if it
makes noise or is worn. Check if the bearing outer race
is accurately fitted into the wheel hub, and replace
worn ones.
Apply sufficient amount of grease to the bearing.
Insert the right bearing with its seal surface facing
outside.
Do not tilt the bearing. Insert accurately.
Upon assembling the distance collar, insert the left
bearing with its seal surface facing outside.
TOOLS : DRIVER HANDLE A
DRIVER PILOT
OUTER DRIVER
CAUTION
The bearing inserted in the last must be inserted until
it contacts with the distance collar.
Excessively inserted bearing can cause damage the
opposite side bearing.
SPEEDOMETER GEAR BOX
Remove the speedometer box from the speedometer
gear box.
Check the gear for wear or damage.