DAELIM BESBI SC125 - Service Manual - page 92
Other manuals for BESBI SC125 -:
Owner's Manual, Service Manual
of
188
Remove the cam chain from the camshaft.
NOTE
Take precautions not to allow the cam chain to drop
into the crankcase.
Remove the camshaft.
Insert the 5mm bolt into the rocker arm shaft, and
pulling bolts to remove the rocker arm shaft.
Remove the rocker arm.
Remove the other side rocker arm shaft and rocker arm
in the same sequence.
CAMSHAFT INSPECTION
Check the rocker arm and rocker arm shaft for wear or
damage.
Measure the inner diameter of the rocker arm.
SERVICE LIMIT : 10.10 mm
Measure the outer diameter of the rocker arm shaft.
SERVICE LIMIT : 9.91 mm
Check the cam lobes of the camshaft for wear or
damage.
Measure the height of the cam lobe.
SERVICE LIMIT : IN : 25.57 mm
EX: 25.41 mm
9-4
CYLINDER HEAD / VALVES