DAELIM BESBI SC125 - Service Manual - Starter Magnetic Switch
STARTER MAGNETIC SWITCH
REMOVAL
Release the seat lock with the main key.
Remove the luggage box.
Remove the center cover.
Remove the battery (+) cable from the starter magnetic
switch terminal.
Remove the starter motor cable from the starter
magnetic switch terminal.
Disconnect the yellow / red connector and green /
yellow connector from the wire harness.
Remove the starter magnetic switch from the switch
setting bracket securing the frame.
Install in the reverse order of removal.
INSPECTION
Check if the starter magnetic switch “clicks” when it is
turned ON.
Clicks
Poorly connected battery terminal and
motor terminal of the switch. (Check the
starter magnetic switch)
No clicks
No starter magnetic switch input voltage.
(Faulty relay ground line and starter
magnetic switch)
Starter magnetic switch voltage
Measure the voltage between the yellow / red wire (+)
and ground at the starter magnetic switch connector.
If battery voltage appears only when the starter switch
is pressed, it is normal.
Starter magnetic switch ground line
Disconnect the wire connector from the starter
magnetic switch and check for continuity between the
ground wire (green / yellow) and ground.
17-7
STARTER SYSTEM