DAELIM BESBI SC125 - Service Manual - page 69
MOVABLE DRIVE FACE INSPECTION
Check the rollers for wear or damage and replace as
necessary.
Measure the O.D. of each roller, replace if the service
limit is exceeded.
SERVICE LIMIT : 17.9mm
Measure the one side wear..
SERVICE LIMIT : 2mm
Check the drive face boss for wear or damage and
replace as necessary.
Measure the O.D of the drive face boss. Replace the
boss if the service limit is exceeded.
Measure the I.D. of the drive face. Replace it if the
service limit is exceeded.
Movable drive face boss outer diameter.
SERVICE LIMIT : 23.94mm
Movable drive face inner diameter.
SERVICE LIMIT : 24.06mm
MOVABLE DRIVE FACE INSTALLATION
Install the weight roller on the movable drive face.
Install the ramp plate.
Install the movable drive face boss.
NOTE
Do not get the grease on the drive face.
Remove any misplaced grease.
Use only the specified grease in the specified amount.
7-9
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION