DAELIM BESBI SC125 - Service Manual - page 75
Other manuals for BESBI SC125 -:
Owner's Manual, Service Manual
of
188
CLUTCH / DRIVEN PULLEY ASSEMBLY
Install new oil seals and O-rings on the movable driven
pulley face.
Install the movable face on the driven pulley face.
Install the guide pins, or guide pins and guide pin rollers.
Install the seal collar.
Assemble the driven pulley, spring and clutch in the
clutch spring compressor. Compress the assembly by
turning the tool handle until the lock nut can be installed.
Clamp the clutch spring compressor in a vise and
tighten the lock nut to the specified torque using the
lock nut wrench.
TORQUE VALUE : 5.0 kgf m
Remove the spring compressor.
TOOLS : CLUTCH SPRING COMPRESSOR
LOCK NUT WRENCH
7-15
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION