DAELIM BESBI SC125 - Service Manual - Movable Drive Face
Install the drive face into the LH. crankshaft serration,
then install the thrust washer, and install the flange nut
temporarily.
Tighten the nut to the specified torque using the drive
face holder.
TORQUE : 4.0 kgf m
NOTE
Install the drive face face accurately into the
LH.crankshaft serration
Hold the clutch outer using the universal holder, tighten
the nut to the speciried torque.
Tighten the nut to the specified torgue using the drive
face holder.
TORQUE : 4.0 kgf m
TOOL : UNIVERSAL HOLDER
MOVABLE DRIVE FACE
REMOVAL
Remove the LH. crankcase cover.
Fix the drive face holder into the drive face.
Remove the drive face nut, thrust washer, drive face.
TOOL : UNIVERSAL HOLDER
Remove the movable drive face and drive face boss.
Remove the ramp plate, weight rollers and oil seal
from the movable drive face.
7-8
LH. CRANKCASE COVER/KICK STARTER/CONTINUOUSLY VARIABLE TRANSMISSION